Rhino T1, E1, J1 PCI Cards (Single Port)

Using Asterisk? Rhino Open Source Telephony PCI products allow you to utilize analog phones and wiring in conjunction with leading-edge Asterisk technology -- without having to buy expensive IP telephones. Why go IP when you can save on installations by using your existing wiring? With Rhino you can use lower cost analog phones with digital features and get guaranteed T1 voice quality, all while enjoying Asterisk VoIP technology for off-premise connectivity.   Rhino offers the lowest T1 card prices on the market. We do not quote a low initial price and later sell you "more stuff" to get the job done. We will give you a low price on a solution that is complete and ready to mount, plug in and immediately begin use.   The Rhino R1T1 card comes in a PCI and PCI-Express format. The PCI version available with optional on-board EC. The PCI Express comes with EC standard.  Echo Cancellation (shown pictured)

For reseller pricing and quantity discounts please contact us at 877.RHINO.T1 (877-744-6681)

Need a channel bank? Take a look at our CB24 series!

R1T1 Pricing

List Price for the Rhino Single Port T1/E1/J1 card PCI (r1t1) -$499 List Price for the Rhino Single Port T1/E1/J1 card with Hardware Echo Cancellation PCI (r1t1-ec) -$699 List Price for the Rhino Single Port T1/E1/J1 card with Hardware Echo Cancellation PCI-e (r1t1-e-ec) -$699

Last Updated on Wednesday, 06 October 2010 18:10

 

Standard Digital Features

All Rhino PCI T1 cards feature a single chip integrated CSU with both LIU and Framer, that is software controlled and software programmable      Complete T1/DS1/ISDN-PRI/E1/J1 Transceiver Functionality      T1/E1/J1 embedded CSU      Long-Haul and Short-Haul Line Interface for Clock/Data Recovery and Wave shaping      Crystal-Less Jitter Attenuator      Fully Independent Transmit and Receive Functionality      Single chip line interface unit (LIU) and Framer      Rhino hardware echo cancellation (REC1) card ready      Asterisk soft PBX tested and ready      Zaptel/DAHDI compliant open source module source code included      Line build-out software selectable      Custom Rhino PCI interface chip means no wasted CPU overhead      Fractional voice and data capable      zttool and dahdi_tool compliant interface      Field software upgradeable      Alarm and Link status LEDs visible from the rear bracket      5-year limited warranty      Unlimited Hardware Support

Last Updated on Friday, 01 October 2010 22:03

 

Digital Compatibility

T1 coding and framing :       D4 or ESF      AMI or B8ZS E1 coding and framing:      D4 or HD3B      CAS or CCS Line build-out selections:       0-133 feet or 0db      133-266 feet      266-399 feet       399-533 feet      533-655 feet       -7.5db       -15db      -22.5db Signaling protocols:       E&M       PRI      Loop     Ground     Kewl Other features:     Distinctive ring in Loop start mode     Caller ID enabled in Loop start mode     Loopback modes under software selection (zttool and dahdi_tool)

Last Updated on Friday, 01 October 2010 22:03

 

Note: We recommend use of a Linux kernel version greater than 2.6.18 for PRI or ISDN use

PCI Card Mechanical Data

Size : 2.5” tall, 4.75 ” wide

Form Factor: Single PCI slot

Weight : 1 pound with all included components maximum

PCI Express Card Mechanical Data

Size : 2.5” tall, 4.75 ” wide

Form Factor: Single x1 PCI-e slot

Weight : 1 pound with all included components maximum